Frontera Technical SupportOften Imitated Never Bettered Laning
Forum rules
Disclaimer: Please understand that the Frontera Owners Group or any organiser of events will not be held responsible for any loss, damage, accident or injury caused by attending an event. You are responsible for your passengers and for your own safety and should carry the necessary recovery and safety equipment. You agree to follow the rules of the Highway Code, Green Lane Code and club pay and play site rules whichever applies. For greenlane events; All events should adhere to the GLASS Code of Conduct, and please note that Rights Of Way often change and if a TRO (traffic regulation order) has been put in place by the local council you should not drive the lane. If you do not agree to the above you should refrain from taking part in the event.
17 posts
• Page 1 of 1
Re: Laning
If this is anything like colleys previous weekend whoever goes will have a brilliant weekend
BRING ON A BIGGER WALL !!!!![color=#4080FF]Cos I Am The Cosmic Fool
East Midland Area Rep Frontera owners stickers here forums/viewtopic.php?f=32&t=47071"
Re: Laning
I could be interested if there's a set date well on advance so I can do some shift swaping as I have no holiday time left until April. However I suspect I'll have to make do with watching videos and photos of the trip
  My 2.8 shorty - now sold, and comments here My old dti - now sold "Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming "WOW --- What a Ride!" This vehicle runs on 100% recycled dinosaurs
Re: Laning
Dan I will try and confirm a date over the next few days
Re: Laning
Aye, I'm interested. Work wise as we have a big contract change at the end of Jan I would prefer Feb rather than Jan but easy either way.
This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered )Work in Progress (or not as the case may be) I give you.... 'O-no' the truck. Comments on 'O-no' the truck may be left here Work in Progress (or not as the case may be) I give you.... 'Truck' Comments on 'Truck' the truck may be left here Owning a 2.8 is a hobby in it's self...
Re: Laning
Where in Wales?
  My members ride For Banshee the Trooper : viewtopic.php?f=46&t=34626 My members ride for Leeloo the Lotus Edition viewtopic.php?f=46&t=60154 Deceased My members ride for Brenda the Bighorn : viewtopic.php?f=46&t=54771
Re: Laning
I can do February if people are interested
I was thinking about starting in Kington then heading towards Rhayader.
Re: Laning
Hmm .. a bit far. Shame.
My members ride For Banshee the Trooper : viewtopic.php?f=46&t=34626 My members ride for Leeloo the Lotus Edition viewtopic.php?f=46&t=60154 Deceased My members ride for Brenda the Bighorn : viewtopic.php?f=46&t=54771
Re: Laning
Okay, re dates.
Seems I've got the last on-call for the contract over the w/e 31 Jan -01 Feb which is likely to be fun as one contract ends on the 31st and we 'tupe' to the new supplier on the 1st. The long and the short of it is that I'm good for any other weekend in Feb. This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered )Work in Progress (or not as the case may be) I give you.... 'O-no' the truck. Comments on 'O-no' the truck may be left here Work in Progress (or not as the case may be) I give you.... 'Truck' Comments on 'Truck' the truck may be left here Owning a 2.8 is a hobby in it's self...
Re: Laning
i maybe interested i dont live to far from there let me know a date and ill see what i can do!
Re: Laning
Any further news?
This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered )Work in Progress (or not as the case may be) I give you.... 'O-no' the truck. Comments on 'O-no' the truck may be left here Work in Progress (or not as the case may be) I give you.... 'Truck' Comments on 'Truck' the truck may be left here Owning a 2.8 is a hobby in it's self...
Re: Laning
Could be up for this, did a few lanes around there over Christmas
Soon to be without a Frontera after 10 years of owning one
Re: Laning
well i know i wont be able to do this now the clutch plate on my fronty 2.5 lwb has just gone have fun guys
Re: Laning
This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered )Work in Progress (or not as the case may be) I give you.... 'O-no' the truck. Comments on 'O-no' the truck may be left here Work in Progress (or not as the case may be) I give you.... 'Truck' Comments on 'Truck' the truck may be left here Owning a 2.8 is a hobby in it's self...
Re: Laning
at the risk of sounding stupid what is a "Spanner party"?
Re: Laning
Strangley enough a spanner party also requires spanners, parts and a broken truck...
The host provides the broken truck, parts, fine food, wine, brews etc etc oh and spanners if they have them. The attendees provide banter, tools if required, knowledge (  ) and lots of hands to get the work required done.The work does get done quicker if brews are restricted or 'staged' ie... take the gearbox off and you get a brew etc etc noting that a spanner monkey with a brew in it's hand is not holding or using a spanner Lots of spanner parties have been held, with tasks ranging from a bit of welding to complete engine swaps and pretty much everything inbetween. This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been
Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered )Work in Progress (or not as the case may be) I give you.... 'O-no' the truck. Comments on 'O-no' the truck may be left here Work in Progress (or not as the case may be) I give you.... 'Truck' Comments on 'Truck' the truck may be left here Owning a 2.8 is a hobby in it's self...
Re: Laning
when would this likely to take place? and i like the idea of a spanner party ill have to make sure its ok with my other half lol
17 posts
• Page 1 of 1
Who is onlineUsers browsing this forum: No registered users and 17 guests | ||||||||||||
