WHAT YOU DID TO YOUR TRUCK TODAY!

[andytats]

removed the side step's because they need modifying to fit with the body lift.
wired up the 6 roof light's
wired the front fog light's
added the 2 recovery point's on the front

[Drift]

A 99er please

[andytats]

Neal you will need these aswel for the side windows http://www.ebay.co.uk/itm/8-ASSORTED-LO ... 2a1c4a865a

[RatCav]

[gregster]

Pink with metalflaked flames wasnt it Neal???

[RatCav]

So many jokers on this forum

[gregster]

Your alright mate, I have other plans for the pink 2 pack...I seem to recall a certain LWB thats sitting up the side of my workshop that is gagging for it, unless its owner gets it mobile soon!!!

[RatCav]

PMSL: that would be a blast from the past ... he is fond of his pink Frontera's I heard. He was gutted when the last one went away!

[snapper]

Not the truck, but the caravan. Checked the battery on it (okay, the lights went out) only to find that it was the original (2003) and 2 cells were er shall we say furry? and the rest happily playing along with the drought we are supposedly having atm. I believe The techy term for it is f****d...

Now with another three days of sunny, wind swept hail and rain blasting pikey living to go the boss decided that I needed to go and get another (amazed the word hotel didnt come into the sentence ) so a trip to halfords was made, the trade card slapted on the table and I asked the young keen assistant for a new caravan leisure battery.... she sort of looked blank, then took us over to the camping bit and the display thing next to it (PP9 for your caravan anyone?)...

Found another assistant who actually new what we were on about (he' wasent as cute though) and we ended up with a reasonably nice 110AHC brand spanking new leisure battery (up grade from the original 85ahc) it just fitted in the box, cleaned up the post clamps and connected it all up. All now running, ready for the national.

[JEOH]

Got her back fom the Greeks who fixed the oilsump seal.

They forgot a wire of the oilpressurethingy, so I connected it myself and was happy I had left the front guard unmounted...

[andytats]

when i bought Bob the 2.5 it didn't have a key fob for the central locking plus the key wouldn't lock or unlock all the doors as the Front door control actuator was broken. so today i fitted this universal remote central locking System all for £34.98

http://www.ebay.co.uk/itm/360394587597? ... 3D1&_rdc=1

[Roo]

Sprayed the top of my Exhaust manifold with WD40, underneath its a bit'' hit and miss'' if the spray is getting there as I hope the work on replacing the studs will be starting soon, have told the guy I am going away the 4th May So it has to be sorted by then

Cheers
Roo

[stevd]

Towed a landy out of the mud stuck on the strata weekend

[th4neuk]

Got it covered in mud off a grassy hill at cadwell park while watching the racing today, ace fun

Cheers

Alan

[Hound Dog]

Nothing just waiting for the new front shocks to arrive.
Might take it to work tomorrow even though the n/s front shock is u/s.

[Retro Pedro]

Continued with the turbo swap - cracked on this morning with just the last bar-steward nut to get off - you know the one, top right with a quarter turn once you have sussed how to get a 12mm spanner on it. After trying the top approach without much success, decided to have a go from the bottom. From underneath the car, I was able to get the spanner on and then get a piece of metal tube against the spanner and give the other end of the tube a whack with a hammer. The started it, then thought better to undo the turbo pipe that returns to the sump. Gave a couple of more mm room but still wasn't happy so disconnect the waste gate bar. That helped a bit more. Started to loosen off a tad which gave me a bit more room to attack from the top. That was a bit more comfortable, but still had to use the metal tube and hammer - this seemed to be easier than using a large ring spanner over the shorter 12mm. Took ages to undo and then it all went very tight and alot more persuasion was with the hammer was required. Finally it loosened off. After wrestling off the turbo unit and could see why the nut went tight. Top quarter of the stud was bent and the thread striped off. Not sure what went wrong but I'm thinking the pressure from the loosened exhaust pipe end might have distorted the pull pressure on the final few turns. The newer donor turbo came with the stud attached, so thought no problems; I'll just get the Irwin stud extractor on the furbed stud and remove it. Bar-steward furbed stud snapped off right at the bit where there’s no thread. Still got about 1/4" of the stud showing, but it's obviously welded in there. Next move is to get the exhaust manifold off so I can take it somewhere to get some heat on it and hopefully get the remains out. Got to drill out the remnants out of the Irwin stud extractor first, just in case I need to use it. That fails reckon I'll be trawling the net for a replacement exhaust manifold.

[snapper]

12mm RATCHET SPANNER Pete... and I used a pair of stillsons to shift broken studs if there is enough sticking out to get a grip on. If not then drill out carefully and re-thread with a bottom tap. You can get an idea of hole depth using another stud and use a fek orf gert big magnet at the same time to grab the swarf.

[wideformat]

Managed to get my nearside front wheel 4 foot in the air hopping up a large piece of Welsh rock

[Retro Pedro]

[RatCav]

I cut the return flange off mine when I fitted it so I can get a spanner on the bolts.

Milners is your friend buddy:

http://www.milneroffroad.com/isuzu/troo ... nuine-part