WHAT YOU DID TO YOUR TRUCK TODAY!

[igotababyfrontera]

Did an oil change while I got five mins.

[geeks]

Loving those new side steps a page back... hmmmm

[Loneranger]

Do you mean Andytats rock sliders Geeks ??

Fitted me new springs today with guidance from Stuart (Fatbaz), jobs a goodun 2" suspension lift sorted.

Pete

[andytats]

Today I finished welding the rock/tree sliders now all I need to do is find some rocks or trees so I can try them out to see if my welding is any good
In total the rock sliders only cost me £10 for the tubing the rest of the metal I got for free so if they fall off the first time I use them then I'll only loose £5 per side lol

[BoxCleva]

Sick to death of noise intrusion , wet carpets and draughts I decided I had to get rid of the crappy gearstick gaiter that is fitted to the A series.

I was speaking to Dave and Bri and Dave had sealed and put some self tappers around his A series gaiter and Bri had wedged old bits of woolly jumper around his Wanting something a little more substantial I whipped the one out of the B series I am breaking and with a little modding, made it fit perfectly

Water ingress is pretty clear to see



A series gaiter



B series gaiter



As you can see the B series one is a much better design and bolts/screws to the transmission tunnel. So a bit of snipping / bending and it's in








No more draughts or leaks and much more importantly I can't hear the knackered tensioner bearing any more

[Dannyboy]

Set about tightening my front hubs/bearings at work n there all done now, was really suprised how loose they were

[BoxCleva]

No snow here

[drinksoptional]

Yet

[Big Dav]

Installed the new inside/outside temp gauge. It was so cold the temp was immediately heading towards zero, couple of hours later and
-6.8c was being displayed with -2c being displayed for the interior temp. It's definitely Baltic out there.

[Drift]

Well at 18.00 I realised it was Lee's birthday tomorrow

So having only the Fronty here I jumped into it and it was -2 inside on my temp gauge -1 outside so I scraped the ice off the inside (none on the outside) and shot off to Asda to get her a present (DAB Radio) and cards.

I hit the blower button and yup I was sitting in a snow globe again

Drove like a dream though when the inside ice melted and I could see where the road was

[gregster]

Now...be honest fellas...

After reading Dwifties post...

How many of you just sneaked a look at the calender or asked the kids when your misses' birthday is???

[Drift]

Bleedin Jessica s birfdy on the tenth as well (Lee will sort that )

[bhcalcutta]

[Drift]

I got this bad boy a few years ago on ebay for a tenner, not seen one since though
It illuminates and has a wire to an outside sensor and also has audible ice warnings but they are annoying but can be turned off

[Big Dav]

Amazon was where I got mine from. Watch though as some do not have display illumination. The prices are usually in the 7 to 15 pounds range. I fix mine to the dashboard or console using self adhesive velcro to facilitate the annual battery replacement.

[gregster]

[Drift]

Feck no, gives me a hint when the inside ice is about to melt and I can see the road

[gregster]

Just think Ste...you will never get chilblains getting into your truck....

Have to say my 2.8lwb is super toasty since I changed the heater matrix, even have to turn down the heater sometimes now!

Might be worth asking if Santa has an account with the Demisterman on ebay.

Gotta say thats the best £60 I have spent in a while

[Drift]

See Greg your missing the point, you have heat at home the kids and wifey need to experience how we used to live in the 60's and early 70's before some daft cock lit the fire and waites 17 hours before the house was warm...that said I am off to the cottage this weekend with a coal fire brrrr @ the mornings

[andytats]

Haven't done anything to the truck today but I did have a big heavy bit of metal turn up today in the post.
This may help protect the diesel tank plus with this I can get rid of the ground anchor
cos the discovery only has a small thin bit of tin at the bottom.


I also have a couple of bits to fit on the back end.
Rear brake disc x2
Brake pads
Rear wheel bearings inner and outer x2


Does anyone want to give me a hand to fit this lot