WHAT YOU DID TO YOUR TRUCK TODAY!

[Drift]

What a star
We will have a blanking party

2.8's invited only

[Road Hog]

Sooty,do you have front & rear recovery points bud ? if not then they would be highly advised to be done for the lake district trip

[Sooty]

Sooty,do you have front & rear recovery points bud ? if not then they would be highly advised to be done for the lake district trip

Just ordered some 16mm shackles off ebay

[Road Hog]

Sooty,do you have front & rear recovery points bud ? if not then they would be highly advised to be done for the lake district trip

Just ordered some 16mm shackles off ebay

Cool

[drinksoptional]

it bird poo season i had a few direct hits on my window an bodywork mind you Marvins is bogging you hardly notice im trying to resist washing it but i got the focus washed and it frigging shiny as so i want them to match

[Trugga]

So - has anyone else had issues with Milner's leaf springs??

Yes everyone who has bought one ..

Sorry, not me - I never needed to grind down my location dowels


Lawrence

[Drift]

There is always one

[MrWolf]

A grand day out on Sunday and everyone was heading for the sea. As there was parking available for about a third of the cars about 50 cars headed for a nice grassy slope. But with winter and ice only hours away the nice grass soon turned to mud, deep mud, and we had literally a lot of stuck cars. I was happy to use some Frontera power and pulled out two sedans which had foolishly ventured off the road.
Very nice to be able to help

[jason]

I wind up the front torsion bars by another 1.5" to day, 3" and abit in total now.

[Drift]

Jason, you wont have any droop and the car will hop every where, not to mention your camber

[jason]

ok go on..

What is the limit on these then i have got 2"+shocks going on front this thursday

[andysd1]

you can get them to 3" and there not to bad,

[Drift]

you can get them to 3" and there not to bad,

Hmmmmmm

[andysd1]

tbh, a ball joint flip has mad no differnce to the camber, so i will be case of de-shiming, or droping it half an inch

[jason]

It justs bounce about a bit but,it should be ok when I get the shocks on.
It is 3f up on the front arch and the back is 37" and a bit

[jason]

tbh, a ball joint flip has mad no differnce to the camber, so i will be case of de-shiming, or droping it half an inch

you lost me

[andysd1]

tbh, a ball joint flip has mad no differnce to the camber, so i will be case of de-shiming, or droping it half an inch

you lost me

i was taking about mine,

[Drift]

See

http://www.youtube.com/watch?v=vKHiPbc0 ... _embedded#

viewtopic.php?f=32&t=28284&p=315489&hilit=+camber#p315489

viewtopic.php?f=5&t=27939&p=311620&hilit=+camber#p311620

viewtopic.php?f=32&t=27913&p=311411&hilit=+camber#p311411

viewtopic.php?f=6&t=25318&p=284492&hilit=+camber#p284492

[damrabbit]

replaced rusty rear bumper with a better one that alex give me, wish i hadn't as when i unbolted the bolts the tow bar was so badly battered that the holes wouldn't realign so had to go to big red fronty's as i hadn't got big enough sockets to remove the tow bar finally got it done.

what i thought would be a 30 minute job took a fair few hours and i blame you alex don't give me anything else

[jason]

Thanks Drift
I will have to have I think