WHAT YOU DID TO YOUR TRUCK TODAY!

[Road Hog]

Was it drivers side again bud ??

[Drift]

Yer, I did passenger side last week, I was wondering why I was going through CV gaiters then spotted the grease had been flung about and the gaiters where well chewed, which is unusual as the drive shafts shouldnt have been turning as havent been in 4wd for a while, seems they have been locked at least 4 or 5 weeks and turning the drive shafts also the prop, this is whats caused the leak.....bloody cars

[andysd1]

turns out the clutch on the asin hubs had come apart in the hub and droped in to the locked position,

[Road Hog]

turns out the clutch on the asin hubs had come apart in the hub and droped in to the locked position,

Yep same as last time could it be a weakness ?

[Drift]

Ahhaa thought you meant CV's, not different problem this time Bernie, the last hubs where AVM these are Aisins.

[colley]

I have managed to get a few more jobs done today
I removed the after market air filter and fitted the broken standard air box (it will do for now)
I then moved the vac tank where the birds nest used to be And then finally fitted my front pro comp shocks after sourcing some new bushes

As the day was going well i got brave and had a go at the bolts on the egrs and not one broke then made some blanking plates and the job was a goodun

I have been reading Alex's post on tweaking the pump so my have a go tomorrow

[Wilberforce]

Finally managed to get Lara's new boots on...

With much assistance from Greg and his tyre machine (that man has so many toys) we got my AT's off the rims, the new Special Tracks on, and trimmed the bumper slightly.
Job's a goodun

[gregster]

Glad to be of assistance matey...your new boots look sweet on ya shorty...should be unstoppable now...
and you can never have enough toys, they all come in handy sometimes...I need to make space for more!!!
Had a bumper trimming session today...did the 2.8lwb one also, as the tyres rubbed a tadge!
Jolly good afternoons work...cheers for sorting the fan wiring Jim on the li'll white leafer...its properly bodged now!

[damrabbit]

Replaced the front wheel bearing which has been complaining since my last weekend of playing (about 6 weeks ago )

Might do a bit more tinkering today depends on my mood

[N1ova]

Cleaned the icv on my truck.Might have a look at my dads as its due an mot in 3 weeks.

[Road Hog]

Well I am about to go listen to the car radio while digging the veggie patch oh such great joy that knows no bounds

[andysd1]

turns out the clutch on the asin hubs had come apart in the hub and droped in to the locked position,

Yep same as last time could it be a weakness ?

no mate, think when you are seting them up, you just have to make sure the outer cog, is at least half way round on the mounting spring, and it says to take of and refit, make sure it is in free position, ok for taking it of, but i found it easyer to adjust it to the locked position, to refit them, then when you turn it back to free, it moves to the wright position on the spring,

[drinksoptional]

I removed the nudge bar and a snapped a bolt typical see if i can get mole grips on it an remove it backwards.

[john boy]

Nowt i've resorted to two wheels

[drinksoptional]

Roof off windows out took 7 minutes

[Drift]

Changed oil, went to cash and carry MAKRO in it and got some BBQ goodies and a camping bed then stopped at Andysd1's on the way home gave Furball a few tips on oil changing and fitting a drain plug, had a good laugh at Simo ( he is a good egg ) and met Sooty, nice to meet you mate sorry couldnt stay longer as promised .
And Andy, well is Andy, if you havent met him you will spot him a mile off at Bala, I cant wait for the convoy down, in his own unusual way he will be noticed
Those wheels look bloody fantastic Andy, if I had the dosh I would hustle them off you, tyres are impressive as well, yet another good buy

I aint finished as think as Im half drunk they are turning up here for a few bits later

[-=BOOM=-]

Got bored and found some silver paint, Done the springs and shocks on the beasty since the sun was out.

[Drift]

Looking good Boom mine have just been bladdered in waxoil

And the motley crew are on their way around here, I have received the phone call,....I better sober up fast

[-=BOOM=-]

Thanks Ste, now youve done it though. Wax oil or under seal which is best ? I will be doing to mine end of the month, how much do you go through for a coating? because I was hoping to go half with a mate and do the 2 trucks.

[Drift]

I waxoil, usually every two years but had a mission yesterday and topped up, two litres should do it and a can of spray for the hard to reach places.