WHAT YOU DID TO YOUR TRUCK TODAY!

[Road Hog]

Changed blown headlamp bulb,changed blown brakelight bulb,wiggled the wire on the non working fog light proper job

[gregster]

Today....popped the 33-12.50-15 BFG mud off the beads on the fronty A star alloys, as they kept going down....then applied loads of bead sealer, and re inflated and then balanced em up...took a fair amount of weights to get em right...the worst one wanting 300grames on the inside and 250 on the outside...hit my fingers loads of times putting the weights on...the tyres are real awkward to get round to get the weights on when they are on the balancer...
Tyres now stay inflated which is good and they sit quite nice on the mere 7j fronty alleys...the sidewalls nicely protected as the tyre pulls round well...
Might drop the pressure on long road runs down to 20-25ish psi to give a flatter tyre profile so it doesnt kill the tyre centre tread...

Also took sals saab turbo ragtop for its MOT....and it passed!!!
Will give a celebratory thrash 2moz...tis fun 220ish bhp and vx vectra floorpan

The 2.8lwb is booked in for its test wednesday...need to sort the front wheel bearings and the "bird and plane spotting" headlight...I am kinda a bit more apprehensive about this one passing..... Washed it today...so the tester doesnt get half a ton of mud from the woods fall on him!!! Nice I am, he's gotta pass it now!

[andysd1]

i stroked her under body with my belly many many many times, and she got excited, drift has the picture, lol

[Drift]

And here is Andy's belly rubber, rear seems to be lifted a tad, the rest to follow

[jontera]

Finally got around to replacing my exhaust center pipe. Sheard a couple of bolts, had to cut the bolts off the rear/ tail pipe section. But all good, thanks to the bottom of my tool box and the odds and sods tin of bolts.

thats another one off the MOT to do list, only 5 more to do..

[Drift]

Never did a think to my truck today, but I pinched some paving slabs from Andy then pinched his trailer and Furballs car to take them to my house and laid them in the garden for the shed base, got back to Andys and as Andy was fettling his suspension I got on to changing Furballs glow plugs and stripping down a hub ....but thats another story, flipping ebay eh Chris

However the big result of the day is shown in the picture on Andys truck

[rancidrich]

MOT on monday,(they couldnt fit it in on friday ).
Booked in for 11 am,
Jobs to do still :
1.Waterpump Gasket (sprung a leek this morning, thats what you get for reusing the old gasket with gasket sealer )
2.yet another hose pipe has given up the ghost.
3. Exhaust has started to blow (found a small hole just by the join, will gob it up with exhaust paste just before it goes in )
4.belly pan to be refitted.

Looks like an early start for me in the morning

Gave it a good clean inside and out (made the scratches and dents even more visible now )

[andysd1]

Never did a think to my truck today, but I pinched some paving slabs from Andy then pinched his trailer and Furballs car to take them to my house and laid them in the garden for the shed base, got back to Andys and as Andy was fettling his suspension I got on to changing Furballs glow plugs and stripping down a hub ....but thats another story, flipping ebay eh Chris

However the big result of the day is shown in the picture on Andys truck

hehehehehhe, arrrwww look at the second picture, you can just see the new edition to the family,


good god its tall, 4" on the bsck, and as much as we could on the front to bring it as level to the back as we could,

[john (smifffy)]

looks good andy

just need some bigger tyres to fill all that space

[colley]

Looking good Andy

[4x4 bobby]

Nice truck just a shame about the nut behind the wheel!!!!!!!!!

[rancidrich]

Took her for her MOT today.
She failed 1. side repeater not working,2. n/s rear shock bush,3. sharp egde on bonnet,4. hand brake not quite up to scratch and 5. front number plate is obscured by the A-frame.
Hopefully retest this after noon

[andysd1]

looks good andy

just need some bigger tyres to fill all that space

that would require a body lift, but that will be after bala,

[Rich]

not really what i did to my truck more what i did in it

moved this lot

7 3x2 slabs

8 concrete block

1 6ft gravel board wasnt in when i took the pic



and did the suspension move much



nah not a lot it must be them springs postfinder had made for this fronty

[Drift]

Rich I moved a similar amount on Sunday but used Andys trailer as my boot box was in the back of mine, even used Furball and his car to tow it as he has a tow bar

[4x4 bobby]

:lol: Rich I moved a similar amount on Sunday but used Andys trailer as my boot box was in the back of mine, even used Furball and his car to tow it as he has a tow bar

Typical Scouser!!!!!!!!!!

[jontera]

Last night spent 1 hour undoing the bottom bolts on my lower ball joints, and that was after a week of WD40'ing!!
then
Spent another hour whacking, but it wouldn't budge..broke a spliter..so bolted it back up replaced split pin.

going to buy new pickle fork and a give em a proper beating tonight.

need to get this little job done as MOT is friday at 10am

[Road Hog]

Replaced door mirror had a bit of a "coming together" yesterday,bet they cost more for shiny X5`s

[jontera]

Replaced door mirror had a bit of a "coming together" yesterday,bet they cost more for shiny X5`s

And I bet that the X5 owner doesn't own the tools to replace it themselves, so it's going to cost them a whole load more.

[rancidrich]

Took Tessie for her retest.
12 months motoring ahead , Now it's time to get her dirty again