WHAT YOU DID TO YOUR TRUCK TODAY!

[yaki]

Well while the fronty is OTR thought i'd remove the head lining so it can be reglued and the wiring for my CB, 2m VHF and 70cm UHF antenna can be put in.

While i was doing that i had my sill hole welded up. Not brilliant but solid. Can tidy it up after i have the green MOT cert!

Nice one, proper job

Looking at your tyres, you up for a bit of laning sometime

[Road Hog]

Started it up & went for a drive

[Drift]

Looking at your tyres, you up for a bit of laning sometime

Doesnt miss a trick

Chris I backed off those bolts, I just knew mine where going to snap and work was the next day, they are there to annoy me another day one thought, would they be easier to have gotten out with the engine warm?


Fast drive Bernie

[Road Hog]

Being a bit sensible at the moment,but going diagonally slow lane to fast,50 -80 in fifth so not to bad on acceleration

[Drift]

Good man, so you do feel an improvement then

[Road Hog]

Much better between 1500 & 3000 revs pulls smoother & harder

[Drift]

Yer I pulled better between 15 and 30

[Sir-Doris]

I contemplated taking out the headlining and seats and steam cleaning them. Instead I finished wiring the lights and sockets in the garage.

Now I can remove them in warmth and light to steam clean them!

[alex]

Them bolts never come out first time. I did the same. Fortunately they arent a funny size and you can usually spin an M8 down a few and weld internally to turn them out.

You get yours out Ste? or still having a fight?

[Drift]

Still stuck in, I forgot about then till Chris posted to be honest

[Dave_RAYNET]

Well while the fronty is OTR thought i'd remove the head lining so it can be reglued and the wiring for my CB, 2m VHF and 70cm UHF antenna can be put in.

While i was doing that i had my sill hole welded up. Not brilliant but solid. Can tidy it up after i have the green MOT cert!

Nice one, proper job

Looking at your tyres, you up for a bit of laning sometime

will be when i get 3 more just like it... lol, running on 1 mud and 3 AT's at the minute

[woodwizzard]

Washed it again as it got sprayed with hyraulic oil last night. Pulled winch cable out and oiled it ready for Dave and Ste

[weave67]

Washed it again as it got sprayed with hyraulic oil last night. Pulled winch cable out and oiled it ready for Dave and Ste

[Drift]

Dave and Ste

Thats to get me out the sack with me hangover

[weave67]

well this afternoon i did my first major job on the dirty diesel,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,errrr well i changed the fuel filter oh and fitted new poly bushes from milners,in my extended shakels,that are the same as the ones in the for sale section

[JueOmega]

Started ripping the gearbox out at 1pm to replace the clutch.
Weave came round at 7.30 and i'd refitted the gearbox, and all the interior, fitted the 2" coil lift and wound up the front.

Not bad for an afternoons work.

[Drift]

Refurbished my spare radiator while waiting for my tea to cook

[weave67]

Started ripping the gearbox out at 1pm to replace the clutch.
Weave came round at 7.30 and i'd refitted the gearbox, and all the interior, fitted the 2" coil lift and wound up the front.

Not bad for an afternoons work.

show off

[JueOmega]

I spose it's justice really, I went to unload some bits into the garage, Went to shut the swing away tailgate and crunch, Bent all the check bar...

[Drift]

Ive got a spare check bar, remind me before Bala and Ill bring it along