WHAT YOU DID TO YOUR TRUCK TODAY!

[Road Hog]

[FUDDY MUCKER]

[andysd1]

[FUDDY MUCKER]

I draw the line at growing a beard !!!

[andysd1]

[FUDDY MUCKER]

[andysd1]

A friend has soft lips,

[Road Hog]

[Drift]

[dandan]

Well I finally managed to get the Rover firing up under it's own power

After an hour of very systematic deduction, it turned out to be a loose connection between starter motor and ignition

Also discovered that I need a temp gauge sender unit and that my aux drive belt is quite difficult to get hold of

Still plenty more I can be getting on with

[andysd1]

[damrabbit]

re-fitted (bodged) the vacuum tank that i mistakenly removed while fitting pikey snorkel yesterday

i once again have brakes

[andysd1]

[Drift]

Think they are only on the 2.8's

[andysd1]

[Drift]

In that case get it going and check the brakes, rather important its there

[weave67]

well today i stripped both my front driveshafts and auto hubs,cleaned all the old grease out ,Messy job,then rebuilt the lot using semi synthetic grease i liberated from work for the auto hubs i gave them a good clean and used a little engine oil on re assembly,aint i a good boy

[Drift]

Well done Weavy boy all set for the weekend

[weave67]

oh yeah roll on the weekend

[Trugga]

Yesterday on a whim (up at Bobby4x4's to collect some woo woo's) I decided to remove the bash plate of the SWB - 8 bolts and it was off (I was going to take it off any way, but decided to do it with plenty of assistance to call upon should it be needed)

Then I realised - how was I going to transport it home... With a bit of head scratching, Alchamist managed to get it in the back of the sport on it's side, between the front seat and the roll cage, with only a bit sticking out the rear window (which had to be removed).

New exhaust being fitted Thursday, then refit the bash plate and of to Whales we go.

Lawrence