// Frontera Technical Support • View topic - Happy Birthday Retro Pedro
   
 

Happy Birthday Retro Pedro

banter general discussions etc

Re: Happy Birthday Retro Pedro

Postby MG Autos (Mark) on Sat Sep 10, 2016 1:06 pm

Happy Brthday Pete :thumbup:
User avatar
MG Autos (Mark)
Member & Trader
 
Posts: 1458
Joined: Sun Dec 17, 2006 5:52 pm
Location: WEST SUSSEX
Model: 2.8 TDI 5dr
Registration Year: 1994/M
Modifications: Largely Standard at the minute.
&
Standard 2010 Renault Megane 1.5 Turbo Deisel for the daily commute. Downside, no 4x4, up side around 700 miles to a tank of Diesel.......
&
Tuned Volvo C70 for Sunny Days and Roof Down Fun
&
Modified BMW R1200RT for Touring, commuting and general two wheeled fun.

Previous frontera's include numerous A series SWB 2.0, one A Series 2.2 LWB, one A Series 2.3 DT, one B Series 2.2 Petrol LWB, one B Series 2.2 DT LWB, loads and loads of 3.2 V6's.
Region: South East



Re: Happy Birthday Retro Pedro

Postby stretch on Sat Sep 10, 2016 1:18 pm

Have a good one matey
User avatar
stretch
Rain cloud of doom
Rain cloud of doom
 
Posts: 3163
Joined: Wed Jul 18, 2007 3:26 pm
Location: Ipswich
Model: 2.2 DTI 5dr
Registration Year: 2000/W
Vehicle Name: F.I.T.T
Modifications: 12v feed in boot
Truckputer under construction
Front & rear recovery points
De side stepped
Region: East Anglia



Re: Happy Birthday Retro Pedro

Postby Retro Pedro on Sat Sep 10, 2016 1:31 pm

Cheers Guys - yep up for a :drink: later with my bro and wifeys :party:
Retro Pedro
Lord frontera
Lord frontera
 
Posts: 2715
Joined: Sun Apr 27, 2008 10:34 am
Location: West Kent
Model: 2.8 TDI Sport 3dr
Registration Year: 1995/N
Vehicle Name: Grandads Tractor
Modifications: A few suspension modifications to assist with ground clearance and fitting of bigger tyres.
Region: South East



Re: Happy Birthday Retro Pedro

Postby snapper on Sat Sep 10, 2016 9:06 pm

Happy Birthday Pete, have a good one and don't get too sober!
This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been

Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered ;) )

Work in Progress (or not as the case may be) I give you.... 'O-no' the truck.

Comments on 'O-no' the truck may be left here

Work in Progress (or not as the case may be) I give you.... 'Truck'

Comments on 'Truck' the truck may be left here

Owning a 2.8 is a hobby in it's self...
User avatar
snapper
Lord frontera
Lord frontera
 
Posts: 2188
Joined: Sat Mar 27, 2010 1:32 am
Location: Oxfordshire, Brize Norton.
Model: 2.8 TDI 5dr
Registration Year: 1995/N
Vehicle Name: Truck and O-no
Modifications: -
2.8 TD LWB - Truck:
Side Steps Removed
EGR, Birds Nest & Both Butterfly Valves Removed
Particulate Filter removed and pipe welded in
Safari Snorkel fitted
Trooper Flywheel & Clutch fitted
Trooper LSD Rear Axle fitted
Winch Bumper & Winch fitted
3.1 Engine Fitted
2" Suspension Lift

2.8 TD LWB - O-no:
Standard, for now.

2.5 Volvo 850 Saloon:
Standard

Volvo XC70 D5 SE Lux (185bhp)
Standard
Region: South East



Re: Happy Birthday Retro Pedro

Postby Retro Pedro on Sun Sep 11, 2016 12:01 am

Cheers Frank - me and my bro have just done a bottle of Barcardi so all good - you about next weekend if you fancy the Kent North Downs?
Retro Pedro
Lord frontera
Lord frontera
 
Posts: 2715
Joined: Sun Apr 27, 2008 10:34 am
Location: West Kent
Model: 2.8 TDI Sport 3dr
Registration Year: 1995/N
Vehicle Name: Grandads Tractor
Modifications: A few suspension modifications to assist with ground clearance and fitting of bigger tyres.
Region: South East




Return to General discussion

Who is online

Users browsing this forum: No registered users and 12 guests