// Frontera Technical Support • View topic - Hub bearing
   
 

Hub bearing

banter general discussions etc

Hub bearing

Postby mickh on Thu Jun 16, 2016 5:59 pm

Does anybody know where I can get a front hub bearing from. This is the bearing that supports the drive shaft to the hub not the wheel bearings. Vauxhall can get one from Germany which will take 5 working days but I am impatient and want one now.
mickh
frontera God
frontera God
 
Posts: 725
Joined: Thu Jan 28, 2010 11:10 pm
Location: ipswich
Model: 2.2i 16v RS Sport 3dr
Registration Year: 1999/V
Modifications: 2" lift.
Front winch.
CB radio.
Manually operated radiator fan.
BK Racing Alloys with 31x10.5x15 A/T.
Cross Country +2" rear shocks.
Region: East Anglia



Re: Hub bearing

Postby RatCav on Thu Jun 16, 2016 7:11 pm

Do you mean the needle bearing the CV joint runs on inside the steering knuckle stub?

If so Milners stock genuine Isuzu, or Isuzu can get them next day.
ImageImage

My members ride For Banshee the Trooper : viewtopic.php?f=46&t=34626

My members ride for Leeloo the Lotus Edition viewtopic.php?f=46&t=60154

Deceased

My members ride for Brenda the Bighorn : viewtopic.php?f=46&t=54771
User avatar
RatCav
Super Trooper
Super Trooper
 
Posts: 5577
Joined: Thu Mar 19, 2009 11:20 am
Location: Preston, Lancs.
Vehicle Name: Banshee
Modifications: Its a Frontera that is heavily disguised as a Mk.1 LWB Isuzu Bighorn 2.8TD Lotus Edition.
Hi-roof modification.
EGR valves and birds nest of vacuum pipes removed.
Front Manual Locking Hubs.
Rear Limited Slip Differential.
Yota Surf steels, with custom paintjob. (cheers Gregster)
33x12.5" R15 General Grabber AT 2's.
+2" suspension lift.
+3" body lift.
Cat 1 Thatcham approved alarm.
Irmscher wheel arch flares.
Full body restoration/respray. (cheers Gregster again!)
Region: North West



Re: Hub bearing

Postby RatCav on Thu Jun 16, 2016 7:28 pm

Part "3"

Part number 94407708 (Isuzu Part Number 8944077080)

Image

Worth getting the thrust washer as well. They are only a couple of quid.

Worth noting Isuzu are only £1 more expensive .. and don't charge £5,000,000 delivery ;)
ImageImage

My members ride For Banshee the Trooper : viewtopic.php?f=46&t=34626

My members ride for Leeloo the Lotus Edition viewtopic.php?f=46&t=60154

Deceased

My members ride for Brenda the Bighorn : viewtopic.php?f=46&t=54771
User avatar
RatCav
Super Trooper
Super Trooper
 
Posts: 5577
Joined: Thu Mar 19, 2009 11:20 am
Location: Preston, Lancs.
Vehicle Name: Banshee
Modifications: Its a Frontera that is heavily disguised as a Mk.1 LWB Isuzu Bighorn 2.8TD Lotus Edition.
Hi-roof modification.
EGR valves and birds nest of vacuum pipes removed.
Front Manual Locking Hubs.
Rear Limited Slip Differential.
Yota Surf steels, with custom paintjob. (cheers Gregster)
33x12.5" R15 General Grabber AT 2's.
+2" suspension lift.
+3" body lift.
Cat 1 Thatcham approved alarm.
Irmscher wheel arch flares.
Full body restoration/respray. (cheers Gregster again!)
Region: North West



Re: Hub bearing

Postby stretch on Thu Jun 16, 2016 7:51 pm

Beat me to it lol, I think milner do them but not sure on the quality.
You do not have the required permissions to view the files attached to this post.
User avatar
stretch
Rain cloud of doom
Rain cloud of doom
 
Posts: 3163
Joined: Wed Jul 18, 2007 3:26 pm
Location: Ipswich
Model: 2.2 DTI 5dr
Registration Year: 2000/W
Vehicle Name: F.I.T.T
Modifications: 12v feed in boot
Truckputer under construction
Front & rear recovery points
De side stepped
Region: East Anglia



Re: Hub bearing

Postby RatCav on Thu Jun 16, 2016 8:05 pm

RatCav wrote: Milners stock genuine Isuzu.


;)

Though I buy from Isuzu direct and save on the postage. Also Isuzu can get them next day.

Guess what job I have to do :D

Image
ImageImage

My members ride For Banshee the Trooper : viewtopic.php?f=46&t=34626

My members ride for Leeloo the Lotus Edition viewtopic.php?f=46&t=60154

Deceased

My members ride for Brenda the Bighorn : viewtopic.php?f=46&t=54771
User avatar
RatCav
Super Trooper
Super Trooper
 
Posts: 5577
Joined: Thu Mar 19, 2009 11:20 am
Location: Preston, Lancs.
Vehicle Name: Banshee
Modifications: Its a Frontera that is heavily disguised as a Mk.1 LWB Isuzu Bighorn 2.8TD Lotus Edition.
Hi-roof modification.
EGR valves and birds nest of vacuum pipes removed.
Front Manual Locking Hubs.
Rear Limited Slip Differential.
Yota Surf steels, with custom paintjob. (cheers Gregster)
33x12.5" R15 General Grabber AT 2's.
+2" suspension lift.
+3" body lift.
Cat 1 Thatcham approved alarm.
Irmscher wheel arch flares.
Full body restoration/respray. (cheers Gregster again!)
Region: North West



Re: Hub bearing

Postby mickh on Thu Jun 16, 2016 8:12 pm

Thanks men you nailed it. Neal where do I get the Isuzu ones to save on the postage if its too high.
mickh
frontera God
frontera God
 
Posts: 725
Joined: Thu Jan 28, 2010 11:10 pm
Location: ipswich
Model: 2.2i 16v RS Sport 3dr
Registration Year: 1999/V
Modifications: 2" lift.
Front winch.
CB radio.
Manually operated radiator fan.
BK Racing Alloys with 31x10.5x15 A/T.
Cross Country +2" rear shocks.
Region: East Anglia



Re: Hub bearing

Postby stretch on Thu Jun 16, 2016 8:49 pm

User avatar
stretch
Rain cloud of doom
Rain cloud of doom
 
Posts: 3163
Joined: Wed Jul 18, 2007 3:26 pm
Location: Ipswich
Model: 2.2 DTI 5dr
Registration Year: 2000/W
Vehicle Name: F.I.T.T
Modifications: 12v feed in boot
Truckputer under construction
Front & rear recovery points
De side stepped
Region: East Anglia



Re: Hub bearing

Postby snapper on Thu Jun 16, 2016 9:07 pm

Same job as me, using Milner's parts.
This posting may have been helpfull, on the other hand probably not... Either way, I may have had drink when posting it in which case it's probably not as helpfull as it could have been

Work safe, and remember all technical problems can be resolved with a hammer, the trick is knowing where to hit it and how big a hammer to use (I often find it may also help to have a spare bit in the shed to replace the bit you have just mullered ;) )

Work in Progress (or not as the case may be) I give you.... 'O-no' the truck.

Comments on 'O-no' the truck may be left here

Work in Progress (or not as the case may be) I give you.... 'Truck'

Comments on 'Truck' the truck may be left here

Owning a 2.8 is a hobby in it's self...
User avatar
snapper
Lord frontera
Lord frontera
 
Posts: 2188
Joined: Sat Mar 27, 2010 1:32 am
Location: Oxfordshire, Brize Norton.
Model: 2.8 TDI 5dr
Registration Year: 1995/N
Vehicle Name: Truck and O-no
Modifications: -
2.8 TD LWB - Truck:
Side Steps Removed
EGR, Birds Nest & Both Butterfly Valves Removed
Particulate Filter removed and pipe welded in
Safari Snorkel fitted
Trooper Flywheel & Clutch fitted
Trooper LSD Rear Axle fitted
Winch Bumper & Winch fitted
3.1 Engine Fitted
2" Suspension Lift

2.8 TD LWB - O-no:
Standard, for now.

2.5 Volvo 850 Saloon:
Standard

Volvo XC70 D5 SE Lux (185bhp)
Standard
Region: South East



Re: Hub bearing

Postby RatCav on Thu Jun 16, 2016 9:28 pm

mickh wrote:Thanks men you nailed it. Neal where do I get the Isuzu ones to save on the postage if its too high.


Phone Isuzu dealer with part numbers.

Collect from dealer next day ;)

I do recommend the washer as well. It has a Teflon(?) coating that sits against the face of the CV joint. If the bearing has gone I can guarantee the washer has worn the surface off as well.
ImageImage

My members ride For Banshee the Trooper : viewtopic.php?f=46&t=34626

My members ride for Leeloo the Lotus Edition viewtopic.php?f=46&t=60154

Deceased

My members ride for Brenda the Bighorn : viewtopic.php?f=46&t=54771
User avatar
RatCav
Super Trooper
Super Trooper
 
Posts: 5577
Joined: Thu Mar 19, 2009 11:20 am
Location: Preston, Lancs.
Vehicle Name: Banshee
Modifications: Its a Frontera that is heavily disguised as a Mk.1 LWB Isuzu Bighorn 2.8TD Lotus Edition.
Hi-roof modification.
EGR valves and birds nest of vacuum pipes removed.
Front Manual Locking Hubs.
Rear Limited Slip Differential.
Yota Surf steels, with custom paintjob. (cheers Gregster)
33x12.5" R15 General Grabber AT 2's.
+2" suspension lift.
+3" body lift.
Cat 1 Thatcham approved alarm.
Irmscher wheel arch flares.
Full body restoration/respray. (cheers Gregster again!)
Region: North West



Re: Hub bearing

Postby mickh on Sat Jun 18, 2016 7:48 pm

So far so good. Ordered the parts from Milners thursday night and they duly turned up today via good old Yoda. They look the right parts so fingers crossed.
mickh
frontera God
frontera God
 
Posts: 725
Joined: Thu Jan 28, 2010 11:10 pm
Location: ipswich
Model: 2.2i 16v RS Sport 3dr
Registration Year: 1999/V
Modifications: 2" lift.
Front winch.
CB radio.
Manually operated radiator fan.
BK Racing Alloys with 31x10.5x15 A/T.
Cross Country +2" rear shocks.
Region: East Anglia



Re: Hub bearing

Postby RatCav on Sat Jun 18, 2016 8:11 pm

Good luck getting the old ones out. The washer should be easy to pull out past the seal.

The needle bearing is different. I ended up making a drift tool to push it out from the other end (wheel side).

When you look inside the stub you will see the bearing sits in a larger diameter step. I took a chisel and ground the end flat. I then ground the side to have an angled notch. I plan on doing mine tomorrow so will take photos.
ImageImage

My members ride For Banshee the Trooper : viewtopic.php?f=46&t=34626

My members ride for Leeloo the Lotus Edition viewtopic.php?f=46&t=60154

Deceased

My members ride for Brenda the Bighorn : viewtopic.php?f=46&t=54771
User avatar
RatCav
Super Trooper
Super Trooper
 
Posts: 5577
Joined: Thu Mar 19, 2009 11:20 am
Location: Preston, Lancs.
Vehicle Name: Banshee
Modifications: Its a Frontera that is heavily disguised as a Mk.1 LWB Isuzu Bighorn 2.8TD Lotus Edition.
Hi-roof modification.
EGR valves and birds nest of vacuum pipes removed.
Front Manual Locking Hubs.
Rear Limited Slip Differential.
Yota Surf steels, with custom paintjob. (cheers Gregster)
33x12.5" R15 General Grabber AT 2's.
+2" suspension lift.
+3" body lift.
Cat 1 Thatcham approved alarm.
Irmscher wheel arch flares.
Full body restoration/respray. (cheers Gregster again!)
Region: North West



Re: Hub bearing

Postby RatCav on Tue Jun 21, 2016 9:06 pm

This is what I use to drift the bearing out. You drop it in front the front and put the notched bit up against the back of the needle bearing and tap, move around 90 degrees. tap, move round 90 degrees etc etc etc.

Just done one and it came out a treat.

Image

Image
ImageImage

My members ride For Banshee the Trooper : viewtopic.php?f=46&t=34626

My members ride for Leeloo the Lotus Edition viewtopic.php?f=46&t=60154

Deceased

My members ride for Brenda the Bighorn : viewtopic.php?f=46&t=54771
User avatar
RatCav
Super Trooper
Super Trooper
 
Posts: 5577
Joined: Thu Mar 19, 2009 11:20 am
Location: Preston, Lancs.
Vehicle Name: Banshee
Modifications: Its a Frontera that is heavily disguised as a Mk.1 LWB Isuzu Bighorn 2.8TD Lotus Edition.
Hi-roof modification.
EGR valves and birds nest of vacuum pipes removed.
Front Manual Locking Hubs.
Rear Limited Slip Differential.
Yota Surf steels, with custom paintjob. (cheers Gregster)
33x12.5" R15 General Grabber AT 2's.
+2" suspension lift.
+3" body lift.
Cat 1 Thatcham approved alarm.
Irmscher wheel arch flares.
Full body restoration/respray. (cheers Gregster again!)
Region: North West




Return to General discussion

Who is online

Users browsing this forum: No registered users and 31 guests