Hi all got a serious leak from my 2.2 dti b series is it a easy job or do I have to remove timing belts and such or is it a nice easy slip crank pully off replace and done any help would be greatly appreciated
Cheers
//
crankshaft seal need some help
4 posts
• Page 1 of 1
crankshaft seal need some helpHi all got a serious leak from my 2.2 dti b series is it a easy job or do I have to remove timing belts and such or is it a nice easy slip crank pully off replace and done any help would be greatly appreciated
Cheers
Re: crankshaft seal need some helpfront or rear seal?
as the rear can be a bit of a pig to do. CARTREK
the final Frontera and the duck http://www.fronteraowners.co.uk/viewtopic.php?f=46&t=54084 and the white one http://www.fronteraowners.co.uk/viewtopic.php?f=46&t=56305
Re: crankshaft seal need some helpFrom the way your talking its the front crankshaft seal. Its fairly straight forward if you remove the radiator and the intercooler first. Just done mine. The crankshaft pulley nut can be a pig but i put a long ring spanner on it with it close to the chassie then cranked it over but only a very short burst. This undid it enough to then turn with a spanner. Used a screwdriver to remove the oldo one then tapped in the new one.
hope this helps mate? Comments on Betsy here please!!! viewtopic.php?f=115&t=56282
Bobster!!!! Frontera's do it better in MUD!!! West Midlands Area Rep Its here, the FOG Annual Meet 2014 viewforum.php?f=123
Re: crankshaft seal need some helpHi guys Cheers for your reply managed to do it all from underneath only took an hour lol
Didn't need to remove the radiator just give it a quick click on the key and sorted Cheers peeps
4 posts
• Page 1 of 1
Who is onlineUsers browsing this forum: No registered users and 31 guests | ||||