//
Mot Failure
21 posts
• Page 1 of 2 • 1, 2
Mot FailureHi All
Took My Frontie for her Mot today It Failed on the following 1.Front Brake imbalace 2. Exhaust emmisions (will post print out shortly) 3. Rear registation plate obscured ? ? Was he being picky or is it me? Thanks
Rear registation plate obscured ? ? taking the p*ss
http://lancslanes4x4.freeforums.org/portal.php
please feel free to join
Got mentioned on mine with the recovery hook, though he didnt write it down, so next time Ill unbolt it then put it back on
And mine is even less of an obstruction Ste
FOG Administrator Frontera Technical Support Often Imitated Never Bettered http://www.fronteraowners.co.uk Its here, the FOG Annual Meet 2014 viewforum.php?f=123
technical he is correct but you dont know if vosa were doig a check on him
if it was me i would let it go you have a choice unbolt the ball or put sticky one on bodywork
i would unbolt the towball when going for retest and take it back to same place
i would also get down to last 4 gall and put some cataclean in petrol and change plugs and airfilter before going back it will lower emissions
Take it elsewhere for MOT
I think you have two weeks grace to do repairer after a fail What happens, happens. What doesn't happen is not meant to
A much in love and very happy kitty If dyslexic like me then down load this http://www.iespell.com Really improved my confidence when posting Like good music then go here http://www.planetrock.co.uk/default.asp Click on listen now and enjoy
you cant it has to be lit up when dark, unless you are going to wire it up of
course http://lancslanes4x4.freeforums.org/portal.php
please feel free to join
illuminated couldnt get the words out
http://lancslanes4x4.freeforums.org/portal.php
please feel free to join
I put some new plugs and new filter in about 800 miles ago
i drove it for about 20 mins before i went to the test centre but he print out says it wasn't test for another 30 mins so it would have cooled down by then if i am correct? Only just failed fast idle test CO max 0.30 mine 0.56 second fast idle test CO max 0.30 mine 0.40
As a tester he can technicaly fail it but as smiffy said remove the tow ball then put it back on so long as he can see the plate at time of test cann't be failed. don't stick one at the top of the tailgate cause if he gets funny can be failed on no illumination on plate.
It might be slow but i can go anywhere!
Bear in mind that if you put the tow ball back on when your not towing (ie having something else with the number plate on it) then you DO run a risk of getting a ticket from an overly officious officer of the law who can do you for having an obstructed number plate...
www.4x4search.org - your 4x4 search engine. 100% human submitted and edited!
I think 99.9% wouldnt say anthing or just advise, paper work and all that
Ste
FOG Administrator Frontera Technical Support Often Imitated Never Bettered http://www.fronteraowners.co.uk Its here, the FOG Annual Meet 2014 viewforum.php?f=123
Looking at that photo you have 2 positions for the tow ball, its currently on the top 2 leaving the bottom 2 free, so lower it to the bottom 2 and see how things are?
http://www.crag-uk.org" onclick="window.open(this.href);return false;
http://www.rsgb.org" onclick="window.open(this.href);return false; [url]pygphotography.com[/url]
if he does that it will clear theplate but will affect the towing as it will be to low for caravan
He can move it back up for the van, then it wouldnt matter as the van should have a plate on.
Ste
FOG Administrator Frontera Technical Support Often Imitated Never Bettered http://www.fronteraowners.co.uk Its here, the FOG Annual Meet 2014 viewforum.php?f=123
just take it off when through test put back on
I said that way up the top of the tread pmsl
Ste
FOG Administrator Frontera Technical Support Often Imitated Never Bettered http://www.fronteraowners.co.uk Its here, the FOG Annual Meet 2014 viewforum.php?f=123
21 posts
• Page 1 of 2 • 1, 2
Who is onlineUsers browsing this forum: No registered users and 7 guests | ||||||||||