cant get hub cover off

[dave-mr2-frontera]

not long got my fronty and not got 4wd working front wheels dont work. do you have to take the wheel off to take the chrome cover thing off to get into the 6 or so bolts cheers dave.(going to have a look at the circlip you think will have to replace or just slip them back on and were or they ment to go ) sorry for all the questions just doing it now and would like to no every thing before diving right in there

[FUDDY MUCKER]

If the wheels are Steel the hub caps bolt on with the wheel nuts.

If they are Alloy wheels the hubs are screwed on to the wheel by 3 screws at the back. To remove the hub you would need to remove the wheel.

[dave-mr2-frontera]

many thanks

[alex]

You can if your lucky get the cap off without. Need slim socket (14mm) but better removed.

[Drift]

Just take the wheel off to get at the hub

[dave-mr2-frontera]

right the wheels is off and the hub is apart now does anybody now were the location of the circlip and washer are ment to be they seem fine. as the the washer is not fallen out.? does any circlip go on the drive shaft to stop it from moving through it seems flush and does not want to move. you know the wee spring thing well when i push that unit in the drive shaft move but does not move when i dont how does this work to engage the 4wd. hope yopu understand all this lol try move sence of it